Replacing The Light Bulb; Cleaning And Maintenance; Guarantee - Waeco CoolFreeze CF-80 Bedienungsanleitung

_CF-80_110.book Seite 35 Montag, 8. Januar 2007 2:43 14
6.10
7
8
Downloaded from www.Manualslib.com
➤ Pry out the fuse insert (Fig. 3 2, page 3) with a screwdriver.
➤ Replace the defective fuse with a new one that has the same
rating (T2.5AL 250V).
➤ Press the fuse insert back into the housing.

Replacing the light bulb

➤ Press the switch pin (Fig. 8 2, page 5) downwards so that the
transparent part (Fig. 8 1, page 5) of the lamp can be removed
at the front.
➤ Replace the light bulb.
➤ Press the lamp back into the housing.

Cleaning and maintenance

Caution – Danger of electrocution!
Always pull out the mains plug before you clean and service the
device.
Caution – Danger of damaging the device!
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the device.
Never use brushes, scouring pads or hard or pointed tools to
remove ice or to loosen objects which have frozen in place.
➤ Occasionally clean the inside of the device with a damp cloth.

Guarantee

Our general guarantee conditions apply. If the product is defective,
please send it back to the WAECO branch in your country
(addresses on the back of the operating manual) or to your dealer.
For repair and guarantee processing, please include the following
documents when you send in the device:
A copy of the receipt with purchasing date
Reason for the claim or a description of the fault
manuals search engine
Cleaning and maintenance
35