Selecting The Temperature Unit; Defrosting The Cooler; Replacing The Plug Fuse (12/24 V) - Waeco CoolFreeze CDF18 Bedienungsanleitung

Operation
6.7

Selecting the temperature unit

CDF36, CDF46:
You can switch the temperature display between Celsius and Fahrenheit. To
do this, proceed as follows:
➤ Switch on the cooler.
➤ Press the "SET" button twice.
➤ Use the "ADJUST" button to set the Celsius or Fahrenheit temperature
unit.
6.8

Defrosting the cooler

Humidity can form frost in the interior of the cooling device or on the vapor-
iser. This reduces the cooling capacity. Defrost the device in good time to
avoid this.
A
NOTICE! Danger of damaging the device!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooling device.
➤ If necessary, place them in another cooling device to keep them cool.
➤ Switch off the device.
➤ Leave the cover open.
➤ Wipe off the defrosted water.
6.9

Replacing the plug fuse (12/24 V)

➤ Pull the adapter sleeve (fig. 6 4, page 4) off of the plug.
➤ Unscrew the screw (fig. 6 5, page 4) out of the upper half of the housing
(fig. 6 1, page 4).
➤ Carefully raise the upper half of the housing from the lower (fig. 6 6,
page 4) half.
➤ Take out the contact pin (fig. 6 3, page 4).
32
CoolFreeze
EN