Chauvin Arnoux MN93 Bedienungsanleitung Seite 30

For the clamps:
„ Press the trigger on the clamp to open the jaws.
„ Then clamp the cable that is to be measured. Where possible, the cable should
be centred in the jaws of the clamp.
I
„ Release the trigger.
For the MiniFlex
„ Press on the yellow opening device to open the flexible coil.
„ Open it and place it around the conductor carrying the current to be measured
(only one conductor in the sensor). Where possible, the cable should be centred
in the sensor.

or

„ Close the coil. You must hear the click.
For the AmpFlex
„ Press simultaneously on both sides of the opening device.
„ Then clamp the cable that is to be measured. Where possible, the cable should
be centred in the sensor.
models:
®
models:
®
30