GERATHERM active control GT-1215 Gebrauchsanweisung Seite 49

How to operate the Unit
note:
If you have turned on the Position Control function, once the measure-
ment starts, the blood pressure monitor will detect the gesture first. The
wrist must be between the angle of 30° and 45°. If the position is out
of this angle, the measurement will not start and the display will show
Symbol + eRR until you have the correct position.
SN
note:
If you have the correct position, the display will show
3 seconds, and then continue with the measurement.
SN
for about
49
EN D