Automatically Sizing And Centering The Picture (Auto); Adjusting The Centering Of The Picture (Center); Adjusting The Size Of The Picture (Size); Enlarging Or Reducing The Picture (Zoom) - Sony Trinitron CPD-G400P Bedienungsanleitung

Automatically sizing and centering
the picture (AUTO)
You can easily adjust the picture to fill the screen by using the
(AUTO) item in the SIZE/CENTER menu.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
CENTER and press the center of the control
button again.
The SIZE/CENTER menu appears on the screen.
First move the control button m/M to select
3
(AUTO). Then move the control button ,.
The picture automatically fills the screen.
Notes
• This function is intended for use with a computer running Windows or
similar graphic user interface software that provides a full-screen
picture. It may not work properly if the background color is dark or if
the input picture does not fill the screen to the edges (such as an MS-
DOS prompt).
• The displayed image moves for a few seconds while this function is
performed. This is not a malfunction.
Adjusting the centering of the
picture (CENTER)
This setting is stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
and press the center of the control button again.
The SIZE/CENTER menu appears on the screen.
First move the control button m/M to select
3
horizontal adjustment, or
adjustment. Then move the control button </, to
adjust the centering.
SIZE or
CENTER
for
for vertical
Adjusting the size of the picture
(SIZE)
This setting is stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
press the center of the control button again.
The SIZE/CENTER menu appears on the screen.
First move the control button m/M to select
3
horizontal adjustment, or
adjustment. Then move the control button </, to
adjust the size.
Enlarging or reducing the picture
(ZOOM)
This setting is stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
CENTER and press the center of the control
button again.
The SIZE/CENTER menu appears on the screen.
Move the control button m/M to select
3
and move </, to enlarge or reduce the picture.
Notes
• Adjustment stops when either the horizontal or vertical size reaches its
maximum or minimum value.
• The horizontal adjustment value is not displayed in the menu.
SIZE and
for
for vertical
GB
SIZE or
(zoom),
11