Enlarging Or Reducing The Picture (Zoom); Adjusting The Shape Of The Picture (Geometry); Adjusting The Color Of The Picture (Color) - Sony Trinitron CPD-E215E Bedienungsanleitung

Enlarging or reducing the picture
(ZOOM)
This setting is stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
Move the control button m/M to highlight
2
CENTER and press the center of the control button
again.
The SIZE/CENTER menu appears on the screen.
Move the control button m/M to select
3
and move </, to enlarge or reduce the picture.
Adjusting the shape of the picture
(GEOMETRY)
The GEOMETRY settings allow you to adjust the rotation and
shape of the picture.
The (ROTATION) setting is stored in memory for all input
signals. All other settings are stored in memory for the current
input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
Move the control button m/M to highlight
2
GEOMETRY and press the center of the control
button again.
The GEOMETRY menu appears on the screen.
First move the control button m/M to select the
3
desired adjustment item. Then move the control
button </, to make the adjustment.
Select To
rotate the picture
(ROTATION)
expand or contract the picture sides
(PIN)
shift the picture sides to the left or
(PIN BALANCE)
right
adjust the picture width at the top of
(KEY)
the screen
(KEY BALANCE) shift the picture to the left or right at
the top of the screen
10
Adjusting the color of the picture
(COLOR)
The COLOR settings allow you to adjust the picture's color
temperature by changing the color level of the white color field.
Colors appear reddish if the temperature is low, and bluish if the
temperature is high. This adjustment is useful for matching the
monitor's colors to a printed picture's colors.
SIZE/
This setting is stored in memory for all input signals.
1
Press the center of the control button.
The main MENU appears on the screen.
Move the control button m/M to highlight
2
(ZOOM),
and press the center of the control button again.
The COLOR menu appears on the screen.
Move the control button </, to select a color
3
temperature.
The preset color temperatures are 5000K, 6500K, and 9300K.
Since the default setting is 9300K, the whites will change
from a bluish hue to a reddish hue as the temperature is
lowered to 6500K and 5000K.
4
If necessary, fine tune the color temperature.
First move the control button </, to select USER. Then
move the control button m/M to select R (red), G (green), or
B (blue) and move the control button </, to make the
adjustment.
If you fine tune the color temperature, the new color settings
are stored in memory and recalled whenever you select
USER.
COLOR
USER 5000 K 6500 K 9300 K
R 5 0
G 5 0
B 5 0
SE L ECT EX I T
COLOR