Adjusting The Shape Of The Picture (Geom); Adjusting The Color Of The Picture (Color) - Sony Trinitron CPD-E400E Bedienungsanleitung

Adjusting the shape of the picture
(GEOM)
The GEOM settings allow you to adjust the rotation and shape of
the picture.
The (rotation) setting is stored in memory for all input signals.
All other settings are stored in memory for the current input
signal.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
press the center of the control button again.
The GEOMETRY menu appears on the screen.
First move the control button m/M to select the
3
desired adjustment item. Then move the control
button </, to make the adjustment.
Select To
rotate the picture
expand or contract the picture sides
shift the picture sides to the left or right
adjust the picture width at the top of the screen
shift the picture to the left or right at the top of the
screen
Adjusting the color of the picture
(COLOR)
The COLOR settings allow you to adjust the picture's color
temperature by changing the color level of the white color field.
Colors appear reddish if the temperature is low, and bluish if the
temperature is high. This adjustment is useful for matching the
monitor's colors to a printed picture's colors.
This setting is stored in memory for all input signals.
1
Press the center of the control button.
The main MENU appears on the screen.
GEOM and
2
Move the control button to highlight
press the center of the control button again.
The COLOR menu appears on the screen.
Move the control button m/M to select a color
3
temperature.
The preset color temperatures are 5000K and 9300K. Since
the default setting is 9300K, the whites will change from a
bluish hue to a reddish hue as the temperature is lowered to
5000K.
4
If necessary, fine tune the color temperature.
You can select your own color temperature between 9300K
and 5000K.
First move the control button m/M to select
the control button </, to adjust the color temperature.
sRGB Mode
The sRGB color setting is an industry standard color space
protocol designed to correlate the displayed and printed colors of
sRGB compliant computer products. To adjust the colors to the
sRGB profile, simply set the sRGB "ON" in the COLOR menu.
However, in order to display the sRGB colors correctly (γ=2.2,
6500K), you must set your computer to the sRGB profile.
When you set sRGB to "ON" the brightness (
are automatically set to "31" and "85" respectively. If you change
the brightness (
"OFF."
For information on how to change the brightness (
contrast (6), see page 10.
Note
Your computer and other connected products (such as a printer), must be
sRGB compliant.
COLOR
9 3 0 0 K
5 0 0 0 K
s RGB 2 6
) and contrast (6)
) and contrast (6), sRGB setting is changed to
COLOR
9 3 0 0 K
5 0 0 0 K
+OF F ON
s RGB
COLOR and
GB
. Then move
) and
11