Commissioning; Routine Maintenance - Corghi ERCO X4300 Serie Betriebsanleitung

WARNING
the lift must be commissioned by specially trained staff capable of ensuring that the
lift and all its mechanical and electrical safety systems are operating correctly.
The instructions to be followed are provided at the back of this manual, in a section for
the use of authorised commissioning staff only.
No persons other than the personnel of the Manufacturer's Support Service or of third
party companies authorised to perform technical maintenance work must be allowed to
perform any of the procedures described.
WARNING
Any damage deriving from failure to follow the instructions given above cannot be
charged to the manufacturer and may cause the warranty to become null and void.

rOUTINE MaINTENaNCE

WARNING
the "spare parts" handbook does not authorise the user to carry out work on the
machine with the exception of those operations explicitly described in the operator's
manual, but enables the user to provide the technical assistance service with precise
information, in order to reduce delay.
WARNING
the manufacturer declines all liability for problems and/or damages derived from the
use of non-original spare parts or accessories.
WARNING
It is forbidden to change any operating pressure calibration value for the maximum-
pressure valves or the pressure limiter.
the manufacturer declines all liability for damage caused by tampering with these valves.
WARNING
Before proceeding with any adjustment or maintenance work, disconnect the machine
from pneumatic and electric power supply, and check that all the moving parts are
locked in place.
WARNING
Do not remove or modify any part of this machine.
Operator' s manual

COMMISSIONING

UK
83