General Installation Instructions - KKT KOLBE DELTA Bedienungsanleitung

English
Comply with safety distance between hob and hood.
1. Clean the environment thoroughly prior to installation in order that no dust or building waste can be drawn in.
2.
3. The exhaust air hose must be routed as straight as possible away from the hood or with a maximum bend outwards of 120° and
fixed to the external wall.
4. To avoid grease accumulations in corners, on installation make sure that the hood hangs horizontally.
A Circulating air filter mode
B Exhaust air mode
Attention! Install carbon filter (A1) only with circulating
air mode
A Installation for circulating air filter mode
Same procedure as described under the following
chapter B . However, omit step 2.
In addition fit the carbon filter(s) A2 before mounting the
grease filter (Fig. A1)
B Installation for exhaust air mode
(B1)
(B2)
Laterally through the house wall to the
outside.
1. Hold the hood suspension plate
mark the holes with a pencil, drill the holes, insert plugs
and screw the hood suspension plate securely to the
wall and hang the hood on the hooks
2. By turning clockwise connect the exhaust air hose
between the one-way valve 2b and exhaust air hose
(Figs. B1 & B2 )
3. Fix strut 3a with screws 3b
3c
3d to the hood 3e and fix with screws 3f.
4. Screw mounting bracket 4a with plugs and screws to
far as the mounting bracket and fix to the mounting
bracket with screws 4b.
5. Connect appliance cable to the mains supply and fit
grease filter A2.
fi90520ATL
Operating instructions / users manual Cooker Hoods
16. General Installation Instruction
Chimney Cooker hoods
1a against the wall,
1b (1c)
See chapter 11.1
r with gas pipes, hot air air pipes etc.
A1
B1
1
1a
2a
2
2a
3 3d
3c
3e
3f
12
A2
B2
1b
4
2b
3a
3b
Figures are for illustration purposes only.
GB
1c
4a
4b