Fehlerbehebung; Fahrrad-Computer-Warnmeldungen - PIVOT cycles SHUTTLE Benutzerhandbuch

Fahrrad-Computer-Warnmeldungen

• Wenn das System ein Problem entdeckt, können auf dem Display
des Fahrrad-Computers Warnmeldungen erscheinen.
• Die Warnmeldung verschwindet automatisch, wenn das Problem
behoben ist.
• Bleiben Probleme auch nach Ausführung der Lösungsvorschlägen
CODE
Drive unit operation tempera-
W010
ture is higher than normal
Traveling speed cannot be
W011
detected
Torque sensor was not initialized
W013
properly
Battery operation temperature
W020
is higher than normal
Shifting unit installed differs
W032
from unit configured in system
Drive unit operation tempera-
W10000
ture is higher than normal
Traveling speed cannot be
W10100
detected
Sensor initialization could not
W103
be completed normally
Sensor initialization could not
W10300
be completed normally
Power was turned off due to
W104
current leakage detected
Power was turned off due to
W10400
current leakage detected
Unexpected power disconnec-
W10500
tion was detected
Battery operation temperature
W20000
is higher than normal
Shifting unit installed differs
W30200
from unit configured in system
www.pivotcycles.com
ISSUE
Power assistance may be lower
than usual
Maximum speed may be lower
than usual
Power assistance may be lower
than usual
No system functions will start
Unable to perform gear shifting
Power assistance may be lower
than usual
Maximum speed may be lower
than usual
Power assistance may be lower
than usual
Power assistance may be lower
than usual
Power assistance will not be pro-
vided while riding
Power assistance will not be pro-
vided while riding
There are no restricted assist func-
tions while displayed
No system functions will start
Unable to perform gear shifting
info@pivotcycles.com
OPERATIONAL
RESTRICTION

FEHLERBEHEBUNG

REMEDY
Stop using the assist function until the
drive unit temperature drops.
Check that the speed sensor is installed
correctly.
Turn the power off and back on again.
Leave the battery in a cool place until the
temperature decreases sufficiently.
Update shifting configuration in E-Tube
Project app.
Stop using the assist function until the
drive unit temperature drops.
Check that the speed sensor is installed
correctly.
Turn the cranks in reverse two or three
times.
Turn the cranks in reverse two or three
times.
Remove components from drive unit and
turn on to find faulty component.
Remove components from drive unit and
turn on to find faulty component.
Check the power cord for damage. Turn
the power off and back on again.
Leave the battery in a cool place until the
temperature decreases sufficiently.
Update shifting configuration in E-Tube
Project app.
1.877.857.4868 10