MSI P45 Platinum-Serie Benutzerhandbuch Seite 16

Installing Memory Modules
1. The memory module has only one notch on the center and will only fit in the right
orient ation.
2. Insert the memory m odule vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the DIMM slot.
You can barely see the golden finger if the memory module is properly inserted in
the DIMM slot.
3. The plastic clip at each side of the DIMM slot will autom atically close.
- DDR2 memory modules are not interchangeable with DDR and the DDR2
- In Dual-Channel mode, make sure that you install memory modules of the
- To enable successful system boot-up, always insert the memory modules
En-8
Downloaded from www.Manualslib.com
M S-7512 M ainboard
Important
Important
standard is not backwards compatible. You should always install DDR2
memory modules in the DDR2 DIMM slots.
same type and density in different channel DIMM slots.
into the DIM M1 first.
manuals search engine
Notch
Volt