Possibilities Of Combining The Source With A Secondary Input; Still Picture / Overscan; Sleep Timer - JVC CO-46LCD-BD Bedienhandbuch

Possibilities of combining the source with a Secondary input

= source combinable with Secondary input
- = source not combinable with Secondary input
Quelle
Tuner *
SCART1
SCART2
CVBS
S-Video
YUV
PC (RGB)
HDMI1
HDMI2
* The TV tuner is an option.
If no signal is pending at the selected PIP source, the picture-in-picture function is terminated after approx. 30 seconds.

Still picture / Overscan

Sleep timer

14
Downloaded from www.Manualslib.com
SCART SCART
Tuner * CVBS
1 2
- -
-
- - -
- - -
- - -
- - -
- - -
- - -
manuals search engine
PIP Quelle
PC
S-Video YUV
(RGB)
- - - -
- - - -
- - - -
- - -
-
- - - -
- -
- -
- - - -
Still picture
You can view still pictures of the current channel.
S Press the button [FREEZE] on the remote control.
The current picture is frozen.
S Press the [FREEZE] button again to terminate the
still picture function again.
If the picture-in-picture function is set, both pictures are
frozen.
S
On the OSD menu you can also switch the still
picture function on and off under the menu option
<Display ⇒ Freeze Picture>.
<Overscan> Only with HDMI !
With the buttons [
<Overscan>. With the buttons [
<Overscan> on or off.
If the option Overscan is switched on, the picture edge
is trimmed by approx. 10 %. Any faults on the edge of
the picture are eliminated or made non-visible by this
cutting facility.
Upon expiry of the preselected time the sleep timer
switches the device to standby mode.
S Press the button [ ] on the remote control until the
desired time up to switch-off is reached.
The following times can be selected:
30, 60, 90, 120, 150, 180 minutes and Off.
HDMI1 HDMI2
-
-
-
-
] / [ ] select the menu option
Y B
] / [ ] you can switch
A "
ENGLISH