Removing/Attaching The Over-Bed Tabletop Mechanism - Dometic vivo 1 Betriebsanleitung

11.1 Removing/attaching the over-bed tabletop mechanism

Image A
Image C
Removing the over-bed tabletop mechanism: Take the handle of the over-bed tabletop and
move it in the direction of the arrow, according to image A then image B. As shown in image
C, push the release lever towards the middle of the body until it is secured. Hold the over-bed
tabletop mechanism and pull it upwards (image D).
Attaching the over-bed tabletop mechanism: As shown in image C, push the release lever
towards the middle of the body until it is secured, then slide the over-bed tabletop mecha-
nism into the guide. The over-bed tabletop mechanism is attached correctly when the relea-
se lever is back in its home position (image C).
Caution: entrapment hazard! When adjusting the position, there is a potential
!
entrapment hazard between the swivel head and the height adjustment.
Please make sure that you do not place your hands in this area.
When removing and attaching the over-bed tabletop mechanism, it must be
!
ensured that the over-bed tabletop mechanism is held securely during the entire
procedure.
Image B
Image D
33