Image [Page 1]; Aspect Ratio; Image [Page 2] - NEC HT1100 Bedienungsanleitung

Deinterlace
Turns on or off the deinterlace function.
On .................. Default standard setting.
Off .................. Select this option if there are some jitter or artifacts in
NOTE: This feature is not available for Scart, 480p, 576p, and non-1080i HDTV
and RGB signals.
Telecine (available only when "Deinterlace" is on)
Use 3:2 pull down correction to eliminate jitter and artifacts in video.
Auto ............... For film source such as a DVD player.
Off .................. For signals other than film sources.
Black Expansion
Minimizes blacks that appear more like shades of gray to provide a
true black and white image at high contrast.
Off/1/2/3/4/5
NOTE: This feature is not available for Scart, 480p, 576p, HDTV and RGB
signals.
Contrast Enhancement
This option allows you to provide a high contrast image in a bright
scene.
–3/–2/–1/Off/1/2/3
NOTE: This feature is available for TV standard signals only.
Downloaded from www.Manualslib.com
video.
manuals search engine

Image [Page 1]

Selecting Aspect Ratio [Aspect Ratio] (not available for Viewer)
Aspect Ratio allows you to select the best Aspect mode to display your
source image.
When screen size 4:3 is selected for the source, the following selections
will display:
Normal ........... Standard 4:3 Aspect.
Zoom ............. All 4 sides stretched.
Cinema .......... Top and bottom reduced to display with black bor-
ders on top and bottom. Available for 4:3 signals only.
V-Zoom .......... Top and bottom stretched. Available for 4:3 signals
only.
When screen size 16:9 and Anamorphic are selected for the source,
the following selections will display:
Normal ........... 16:9 image displayed in 4:3 mode.
Full ................. Stretched to display in 16:9 aspect ratio. Available for
16:9.
Zoom ............. All 4 sides stretched.
Stadium ......... Non-linearly stretched. Available for 16:9 only.
NOTE: You can adjust image positions vertically for source with black borders.
See page E-23 for setting image positions.
Copyright
Please note that using this projector for the purpose of commercial
gain or the attraction of public attention in a venue such as a coffee
shop or hotel and employing compression or expansion of the screen
image with an "Aspect Ratio" or "Screen" setting may raise concern
about the infringement of copyrights which are protected by copy-
right law.
NOTE: During 3D Reform adjustment, "Aspect Ratio" may not be available.
Should this happen, first reset the 3D Reform data and then do setting again.
Second repeat the 3D Reform adjustment.
Changing the aspect ratio can limit 3D Reform in its adjustable range.
E-30