Cleaning And Maintenance - Bimar VSB10 Bedienungsanleitung

Downloaded from www.Manualslib.com
Fax +32 030 9904733
Electrical connections
Carry out electrical connections according to the diagram shown and described below.
- BROWN wire "LIVE": motor phase
- BLUE wire "NEUTRAL": common neutral for motor and lamps
- BLACK wire "LIGHT": lamp phase
- GREEN / YELLOW wire: Grounding, corresponding to the symbol
Connect the wires to the fan and those coming from the ceiling with the supplied terminal
block according to the wiring diagrams provided below: the fan and lamp are controlled by a
switch.
Use
The fan is equipped with the following operating elements:
- Wall-mounted control switch which works by rotating the knob to select 0/min/med/max
- Switch for the motor rotation in a clockwise or anti-clockwise direction
in order to have a direct air flow from the centre to the outside or vice
versa (this feature is only present on some models).
- Switch to turn the lamp on and off (on models with this option) and it works by pressing the 0
/ I switch on models with wall control

CLEANING AND MAINTENANCE

Attention: before normal cleaning operations, turn the fan off, turn the fan lamp off (if
present), and disconnect from mains power by turning off the isolating switch ( pos. 0/OFF).
• For cleaning, use a soft, slightly damp cloth; do not use abrasive or
corrosive products. Be careful not to damage the equipment, blades,
electrical connections, or impair the hardware.
• Do not immerse or soak any part of the fan in water or any other liquid;
in the event that this happens, first ensure the fan is disconnected from
the mains power supply, and then wipe the appliance off carefully,
making sure that all electrical parts are perfectly dry: in case of doubt,
consult a qualified professional.
• It is important to keep the air vents of the motor free of dust and lint.
manuals search engine
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar (Italy).
The pages must be reproduced and folded in order to obtain
a booklet A5 (+/- 148.5 mm width x 210 mm height). When
folding, make sure you keep the good numbering when you
turn the pages of the I/B. Don't change the page numbering.
Keep the language integrity.
11 40
/
Assembly page 11/16