Xerox WorkCentre 7300 Serie Kurzübersicht Seite 25

Procedure for Setup of Scan to FTP/SMB
To use Scan to PC (FTP/SMB) you need to enable the applicable Ports (SMB or FTP client)
on the Device, and make sure that an IP address has been set on the machine.
Note
The configuration can also be performed using CentreWare Internet Services. For
information on how to use CentreWare Internet Services, refer to the Internet
Services section of this guide.
1. Display the System Administrator Menu screen.
a. Press the
b.
Enter the Login ID (11111) with the numeric keypad or the keyboard displayed
on screen, then touch Enter.
c.
Press the
d. Touch the Tools tab.
Copyright © 2008, Xerox Corporation. All rights reserved.
Log In/Out button.
Machine Status
button on the Control Panel.
Scan to FTP/SMB (Optional)
25