Technical Data; Unpacking; Installation - Scheppach NTS30 Premium Originalbetriebsanleitung

m WARNING!
This electric tool generates an electro-
magnetic field during operation. This field
can impair active or passive medical im-
plants under certain conditions. In order
to prevent the risk of serious or deadly
injuries, we recommend that persons with
medical implants consult with their physi-
cian and the manufacturer of the medical
implant prior to operating the electric tool.

6. Technical Data

Mains voltage
Power
Maximum
socket power
Total power
Water tank
capacity
Suction
performance
Protection category
Protection class
Technical changes reserved!

7. Unpacking

Open the packaging and remove the de-
vice carefully.
Remove the packaging material as well
as the packaging and transport bracing
(if available).
Check that the delivery is complete.
Check the device and accessory parts for
transport damage.
If possible, store the packaging until the
warranty period has expired.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
220-240 V~
50/60Hz
1300 W
device 2000 W
3300 W
20 Kpa
Familiarise yourself with the product by
means of the operating instructions be-
fore using for the first time.
With accessories as well as wearing parts
and replacement parts use only original
parts.
Replacement parts can be obtained from
your dealer.
When ordering please provide our article
number as well as type and year of manu-
facture for your equipment.
m ATTENTION!
The device and packaging materials are
not toys! Children must not be allowed
to play with plastic bags, film and small
parts! There is a risk of swallowing and
suffocation!

8. Installation

30 L
m IMPORTANT!
Prior to use, ensure that the device has
been correctly and fully assembled.
Unpacking (Fig. A, B, C)
IP24
• Release the locking hooks (4) and re-
I
move the machine head (2). The acces-
sories are located inside the stainless
steel container (8). Only the metal ex-
tension tube (g) is located outside the
stainless steel container (8) in the pack-
aging. Remove all of the accessories
from the stainless steel container (8).
Installing the castor mounts (5a) (Fig. D)
• Turn the stainless steel container (8)
upside-down. (The machine head (2)
must be removed).
• Push the castor mounts (5a) into the
cut-outs provided on the wheel mount-
ing base (6)
GB | 23