Aquaclean Filter; Aquaclean Filter Installation - Gaggia VELASCA PRESTIGE RI8263 Benutzerhandbuch

AquaClean filter

AquaClean filter installation

5 Repeat steps 1-3 twice.
6 Press the SPECIAL DRINKS button. Place a container under the hot water
dispensing spout.
7 Press the UP/DOWN buttons to scroll through the options of the display.
Press the OK button to select 'hot water'.
8 Press the OK button to start hot water dispensing.
- Dispense water until the display shows the no water icon.
9 Fill the water tank with fresh water up to the MAX level and remove the
container.
The machine is ready for use.
The AquaClean filter is designed to reduce limescale deposits in your coffee
machine and provide filtered water to preserve the aroma and flavor of each
cup of coffee. If you use a series of 8 Aquaclean filters as indicated in this
user manual, you don't have to descale your machine for 5000 cups (with a
capacity of 100 ml).
Your machine has to be completely limescale-free before you start to use
the AquaClean filter. If you did not activate the filter upon first use and
brewed more than 50 cups (with 100 ml capacity), you need to descale the
machine before you activate the filter.
1 Remove the AquaClean filter from its packaging. Shake the filter for about
5 seconds.
2 Immerse the AquaClean filter upside down in a jug with cold water and
wait until no more air bubbles come out.
3 Remove the water tank from the machine.
4 Insert the AquaClean filter vertically onto the filter connection. Push the
AquaClean filter to the lowest possible point. Make sure that the filter fits
tightly and the seal is in the right position, to guarantee the best
performance.
5 Fill the water tank with fresh water and slide it back into the machine.
6 Press the MENU button and scroll to the AquaClean filter option. Then
press the OK button to select the AquaClean filter option.
If you are installing the filter at first time use, follow the steps in chapter
'First installation'.
English
11