Preparations; Inserting The Sd Card; Charging The Rechargeable Battery - VOLTCRAFT WB-100 Bedienungsanleitung

7. PREPARATIONS

a) Inserting the SD Card
Open the battery cover (3) and insert the Micro-SD card into the card slot (9).
b) Charging the Rechargeable Battery
• Before you can work with the meter, you first need to charge the re-
chargeable battery completely with the enclosed mains unit. For full
capacity of the rechargeable battery, please charge at room tempera-
ture only.
• Do not leave rechargeable batteries lying around carelessly. They
could be swallowed by children or pets. If swallowed, consult a doctor
immediately.
• Remove the rechargeable battery if the device is not used for extended
periods of time to prevent leaking.
• Leaking or damaged rechargeable batteries may cause alkali burns if
they come in contact with the skin. Therefore, use suitable protective
gloves.
• Do not disassemble any rechargeable batteries, do not short-circuit
them and do not throw them into fire. Danger of explosion.
Please open the battery compartment cover (3), connect the plug of the rechargeable
battery to the connection socket, insert it into the battery compartment (10) and close the
battery compartment cover (3).
To charge the rechargeable battery, connect the enclosed mains unit to the Mini-USB
socket (8) of the meter. Once charging commences, a plug appears in the rechargeable
battery symbol. The current charge condition can be read at the display based on the
battery icon. The rechargeable battery should be charged for 3 to 4 hours before first
commissioning. Disconnect the mains unit from the camera once the battery symbol is
full.
30