Automatic Switching Off - Blomberg mkl 5460 x Gebrauchsanleitung

On/off for Touch control
After ignition, the touch control requires about 1 second before it is ready to operate. After
resetting, all displays and indicator lights flash for about 1 second. After this, all displays and
indicator lights switch off and the touch control is in the stand-by position.
The touch control can be switched on by pressing the power button. The display for the cooking
zones shows "0". If a cooking zone is "burning hot", the display shows "H", instead of "0". The
decimal point, at the bottom right of all cooking zone displays, flashes at intervals of a second to
indicate that at that moment no cooking zone has been selected.
After being switched on, the touch control stays active for 20 seconds. If a cooking zone or the
timer is not selected, the touch control returns to stand-by.
The touch control switches on only when the power button is activated. Pressing the power button
at the same time as other buttons will have no effect and the touch control will stay on stand-by.
The touch control can be switched off at any time by pressing the power button. This applies even if
the control has been blocked with a child safety lock. The power button should always be the first to
be switched off.

Automatic switching off

Once it is switched on, the touch control automatically switches off after 20 seconds of inactivity.
After selecting a cooking zone without setting the power level, the time for automatic switching off
is 10 seconds. After this, the cooking zone is deselected, and 10 seconds later, the touch control
switches off.
Switching a cooking zone on/off
When the touch control is on, the cooking zone can be selected by pressing the select button (the
PLUS touch control for the related cooking zone): A lit decimal point on the display of a cooking
zone indicates selection. If the zone is "burning hot", an "H" will appear on the display of the
corresponding hotplate. Pressing the (+) button again, it is possible to select a power level and the
cooking zone starts to heat up. After selecting, it is necessary to release the (+) button for 0.3
seconds before being able to select the power using the same button.
After selecting the cooking zone, the power level can be selected pressing down the PLUS button,
starting at level 1 it is increased by one unit every 0.4 seconds. When it reaches level 9, it is not
possible to select higher levels.
If the cooking zone is selected using the (-) button, the starting level is "9" (maximum level). If the
button is pressed down, the active level decreases by one unit every 0.4 seconds. When level 0 is
reached, it is not possible to decrease further. The setting can only be changed by activating the (-)
button or (+) button again.
5