Fitting The Slab End - Konig + Neurath TABLE.T Montageanleitung

4.

Fitting the slab end

Align the main beams (a) with
(a)
the slab end (b) and fix them
from beneath by using cylinder
head screws (c) M8x55 (SW6).
Position desk top (d), fix it
through main beams and
brackets with flat-head screws
5x13.
The lower levelling glide (e) is
used for height adjustment
to compensate for uneven
(b)
flooring.
(c)
(c)
(d)
(e)
30