Bosch UniversalChainPole 18 Originalbetriebsanleitung Seite 16

16 | English
ping area (12)) only, because the saw chain may con-
tact hidden wiring. Saw chains contacting a "live" wire
may make exposed metal parts of the product "live" and
could give the operator an electric shock.
Maintain a firm grip, with both hands on the pole pru-
u
ner and position your body and arm to allow you to
resist any kickback forces. Kickback forces can be con-
trolled by the operator, if proper precautions are taken.
Do not let go of the pole pruner.
When cutting a branch be alert for kickback. When the
u
branch is broached it can bend down and jam the saw
chain.
Carry the pole pruner switched off, always with both
u
hands and the saw chain with bar cover fitted. Proper
handling of the pole pruner will reduce the likelihood of
accidental contact with the moving saw chain.
Do not operate a pole pruner in a tree. Operation of a
u
pole pruner while climbing or situated in a tree may result
in personal injury.
Always keep proper footing and operate the pruner
u
only, when standing on fixed, secure and level sur-
face. Slippery or unstable surfaces such as ladders may
cause a loss of balance or control of the pruner.
Follow instructions for lubricating, chain tensioning
u
and changing accessories. Improperly tensioned or lub-
ricated chain may either break or increase the chance for
kickback.
Keep handles dry, clean, and free from oil and grease.
u
Greasy, oily handles are slippery causing loss of control.
Cut wood only. Do not use the pole pruner for pur-
u
poses that it is not intended for. Example: do not use
the pole pruner for cutting plastic, masonry or non-
wood building materials. Use of the pole pruner for op-
erations different than intended for could result in a haz-
ardous situation.
Causes and operator prevention of kickback:
u
– Kickback may occur when the nose or tip of the guide
bar touches an object, or when the wood closes in and
pinches the saw chain in the cut.
– Tip contact in some cases may cause a sudden reverse
reaction, kicking the guide bar up and back towards the
operator.
– Pinching the saw chain along the top of the guide bar
may push the guide bar rapidly back towards the oper-
ator.
Either of these reactions may cause you to lose control of
the pole pruner which could result in serious personal in-
jury. As a pole pruner user, you should take several steps
to keep your cutting jobs free from accident or injury.
Kickback is the result of incorrect or faulty use of the
product. Kickback can be avoided by taking proper pre-
cautions as given below:
Only use replacement saw chains specified by the
u
manufacturer. Incorrect saw chains may cause chain
breakage or kickback.
If the bar is damaged and in need of replacement, please
u
consult your Bosch Service Center.
F 016 L94 061 | (23.12.2020)
Do not sharpen the saw chain on its own. Please obtain
u
the replacement saw chain (F 016 800 489).
To prevent accidental operation of the saw chain, this
u
chain saw is equipped with a switch with mechanical in-
terlock. To operate the chain saw, the locking button
must be pressed before the saw chain starts operating
(see figure M).
Do not use the product without pressing the locking but-
ton.
Do not operate this tool with only one hand. Hold the
product securely with both hands; one hand to hold the
product securely and the other to operate the On/Off
switch (see figure N).
Never allow children, persons with physical, sensory or
u
mental limitations or a lack of experience and/or know-
ledge and/or people unfamiliar with these instructions to
use the machine. Local regulations may restrict the age of
the operator.
Children should be supervised to ensure that they do not
u
play with the machine.
When not in use store the pole pruner out of reach of chil-
u
dren.
Before operation, check the work area and remove all
u
possible hazards.
Always wait until the machine has come to a complete
u
stop and remove the battery, before placing the ma-
chine down. The saw chain can jam or kickback and lead
to loss of control over the machine.
Switch off the pole pruner when changing the working po-
u
sition.
A cut branch can lead to personal injury by falling on you
u
or springing back from the ground. Cut longer branches in
sections. (see figure N)
Reduce force before the branch is completely cut off. You
u
can get injured when losing balance and control of the
pruner.
Do not hang the product in a tree when you are not using
u
it. Always place the tool on the ground in a safe place
without removing the battery.
Safety Instructions and Recommendations for
Optimal Handling of the Battery
Ensure the product is switched off before inserting
u
the battery. Inserting the battery into a product that has
the switch on can cause accidents.
Use only Bosch batteries intended specifically for this
u
product. Use of any other batteries may create a risk of
injury and fire.
Do not open the battery. There is a risk of short-circuit-
u
ing.
Protect the battery against heat (e.g.,
against continuous intense sunlight), fire,
water, and moisture. There is a risk of explo-
sion.
Keep the battery not being used away from paper
u
clips, coins, keys, nails, screws or other small metal
Bosch Power Tools