TBW203
8
Cleaning and maintenance
!
WARNING! Electrocution hazard
Always disconnect the device from the power supply before you clean
and service it.
A
NOTICE! Risk of damage
• Never clean the cooler under running water or in dish water.
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any dust and
dirt, so that heat can be released and the device is not damaged.
9
Troubleshooting
Fault
The ignition is on and the
cooler is not working.
Your cooler does not
cool satisfactorily and the
outer fan wheel is not
turning.
The cooler does not cool
satisfactorily and the
outer fan wheel is turning.
10
Guarantee
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see back page) or your retailer.
For repair and warranty processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
EN
Possible cause
The vehicle fuse has
blown.
The fan motor is
defective.
The Peltier element is
defective.
Cleaning and maintenance
Suggested remedy
Replace the corresponding fuse in the
vehicle (see the owner's manual).
This can only be repaired by an
authorised repair centre.
This can only be repaired by an
authorised repair centre.
9