❖ After the electrical connection of the hob: close the terminal board cover.
2.3.2 Acoustic warning signal: hob connected incorrectly
❖ The appliance is equipped with an automatic alarm which indicates that the hob
is connected incorrectly.
➢ when the hob is switched on, an acoustic warning signal sounds and the error
code « E9 » is displayed.
➢ L (phase) and N (neutral) are connected incorrectly.
➢ disconnect the appliance from the mains and check the connections.
➢ always observe the connection diagram shown above!
T
ERMINAL BOARD
I
F THE HOB IS CONNECTED INCORRECTLY
~
~
61
: