Automatic Power-Off - SATA 03005 Bedienungsanleitung

Note
If the capacitor to be measured has polarity, connect the red test
probe to the positive pole of the capacitor and the black test probe to
the negative pole.
4. After the reading is stable, read the measured value from the
screen.
Tips
Since the capacitance is calculated using the charge/discharge cycle
of the measured capacitor, the larger the measured capacitance, the
longer the measurement takes.
Diode test
1. Connect the black test probe to the "COM" jack and the red test probe to
the " " jack (or "
Note
The polarity of the red test probe is positive "+".
2. Set the function switch to the "
3. Press the yellow button until the "
4. Connect the red test probe to the positive pole of the diode and the black
test probe to the negative pole.
5. Read the approximation of the forward voltage drop of diode indicated on
the screen. In case of wrong connection of the test probes, "OL" will appear
on the screen.

Automatic power-off

- If the buttons and position switch of the meter have not been operated for
about 30 minutes, the meter will automatically shut down. To restart, please
turn the function switch to "OFF" and then to the desired position.
- To disable the automatic power-off function, turn the meter on while
pressing and holding the yellow button.
03005 / 03007
" jack).
" position.
-33-
EN DE
" appears on the screen.
RU KO PT JA ES