Time Submenu - vimec E10 Handbuch

2.9

TIME submenu

In the TIME menu it is possible to:
• View the working hours of the machine (WORK TIME);
• View the number of hours for which the machine is powered (POWER TIME);
• View the hours remaining to the scheduled maintenance (NEXT MAINTENANCE), with the possibility of
updating the hours for next notice (ADD TIME). The minimum hour block for next maintenance is 20 h, but
it is possible to choose higher blocks (20-40-60-80), so as to schedule maintenance based on the use of the
machine. If the total amount of added hours plus the remaining ones exceeds 80 h, 80 h is set as max.
value.
• Hours reset. This option allows to reset the working hours and power supply hours. Moreover, maintenance
hours are set at 20 h. This operation is protected by password.
TIME
Working hours remaining
to next maintenance
Reset WORK TIME and
POWER TIME. NEXT
MAINTENANCE is
changed to 20 h
8202006: E10 Console Manual - EN
Enter Enter
WORK TIME
0012:20 H:MM
Esc Esc
Enter Enter
NEXT MAINTENANCE
0012:40 H:MM
Enter Enter
RESET TIME
Enter X2 Enter X2
Esc Esc
Up Up
POWER TIME
0080:35 H:MM
Down Down
ADD TIME
Up Up
0020:00 H:MM
Add hours to next
maintenance
13
ADD TIME
Up Up
0040:00 H:MM