Specifications - Makita JR3050T Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Shoe
1-2. Shoe button
2-1. Shoe button
2-2. Shoe
3-1. Switch trigger

SPECIFICATIONS

Max. cutting capacities
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for sawing wood, plastic, metal and
building materials with a strong impact. It is suitable for
straight and curved cutting.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
determined according to EN60745:
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 2.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Downloaded from www.Manualslib.com
Explanation of general view
3-2. Lock button
4-1. Blade clamp sleeve
4-2. Released position
4-3. Fixed position
5-1. Blade
Model
Length of stroke
Pipe
Wood
-1
Strokes per minute (min )
Overall length
Net weight
Safety class
) : 88 dB(A)
pA
) : 99 dB(A)
WA
Wear ear protection
total value (tri-axial vector
2
) : 22.0 m/s
h,CW
2
manuals search engine
ENE021-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
ENF002-1
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG102-3
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Recipro Saw
ENG220-2
Model No./ Type: JR3050T
are of series production and
sum)
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
ENG901-1
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
3
6-1. Blade clamp lever
8-1. Limit mark
9-1. Brush holder cap
9-2. Screwdriver
JR3050T
28 mm
130 mm
255 mm
0 - 2,800
452 mm
3.3 kg
/II
Corporation as the responsible
ENH101-13