Assembly Instructions - Texas Hobby 500 Bedienunganleitung

• The person operating the machine is responsible for the safety of others in the
vicinity. Never use the machine when others, especially children or animals, are
nearby.
• The machine should not be used by under aged.
• The machine should only be lent to persons who know how to use it. For good
measure, always make sure they have the manual as well.
•
The cultivator should only be used by fit, healthy persons. If you get tired, take
frequent breaks.
• Never use the machine after drinking alcohol.
• The factory-fitted control units, such as the gear cable from the handle, must not be
removed or covered.
• Always check that nuts and bolts are tight before starting the machine.

Assembly instructions

Package contents:
The machine comes in a cardboard
box, which contains a basic module,
handlebar, rotor blades, various
parts, and a manual.
Cultivator blades, depth skid and
wheel bracket:
There are two rotor blades, one left
and one right. Fit the blades to the
gear shaft so that the cutting edge
points forward, see arrow. Fit it with
the cotter bolt, which is locked by a
cotter pin.
The wheels are mounted by the
enclosed bolts.
Downloaded from www.Manualslib.com
"Be careful of rotating knifes"
Using the machine on steep slopes is dangerous!
Only use the machine in places where it can be operated safely!
manuals search engine
11