• Playback Mode: NTSC/PAL
• Disc mode: DVD,VCD, CD, MP3, CD-R, CD-RW, JPEG, DVD+ -R/W, MPEG4,
• Resolution: = 500 lines
• Video S/N: = 65dB
• Frequency response in 96KHz fs: 20Hz-20KHz: ± 1 dB
• Audio S/N: 90dB
• Dynamic range: 80dB
• Distortion: < 0.01%
• Converter N/A: 96KHz/24bit
• Video outlet: 1Vp-p (75 Ω)
• 2.0 Outlet channels
• Power consumption: 12W
• Voltage: DC IN 12V
Note: Unit design and specifications are subject to change without notice. The manufacturer reserves the right to make the
necessary improvements.
Consult the following table if there is a problem with the appliance.
Picture without sound
No sound, no picture
Downloaded From Disc-Player.com Thomson Manuals
Downloaded from
www.Manualslib.com
PORTABLE DVD PLAYER
Problems
• Check that the audio connectors are
connected properly.
• Check that the audio connectors are
not damaged.
• Check that the volume is high in the
VOL/CH section.
• Check that the audio parameters have
been correctly defined for the player.
• Check that the audio parameters have
been set up correctly for your television
set.
• Check that the sound has not been
turned off.
• Check that ON/OFF is set to ON.
• Check that the plug is plugged in
correctly.
• Check that the electrical cable's plug
has been plugged into the mains socket.
• Check that the indicator light (LED)
is lit up.
manuals search engine
DP7200
TECHNICAL SPECIFICATIONS
REPAIR AND MAINTENANCE
Solutions
The remote control does
not work
"No disk" is displayed
Problems
Solutions
• Check that the
remote control's
battery is working.
• Point the remote
control towards the
player's infrared
sensor.
• Remove the
obstacles between the
remote control and the
player.
• Make sure that you
have inserted a disk in
the player.
• Check that the disk
has been inserted
correctly.
• Check that the disk
is not deformed, dirty
or scratched.
25
EN