Operation; Installing And Removing Filter - CONSTRUCTA CD649651 Gebrauchs- Und Montageanleitung

Operation

These instructions apply to several appliance models.
It is possible that individual features are described which
do not apply to your appliance.
Note: Switch on the extractor hood when you start cooking
and switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Control panel variant 1
2Q2II IDQ VHWWLQJV
5HGXFH IDQ VSHHG
Control panel variant 2


/LJKW 2Q2II

Installing and removing filter

ã=
Risk of burns, risk of electric shock!
from appliance. Always leave appliance to cool down before
cleaning or servicing. Switch off fuse or pull out mains plug.
Removing metal-mesh grease filter
Open lock and fold down the metal-mesh grease filter.
1.
In doing so, place other hand under the metal-mesh grease
filter.
Take metal-mesh grease filter out of the holder.
2.
14
'LVSOD\ /LJKW 2Q2II
,QFUHDVH IDQ VSHHG
,QWHQVLYH VHWWLQJ
 
)DQ VHWWLQJV
Switching on fan: variant 1
Press On/Off button.
Increase fan setting by pressing button @ or reduce
it by pressing button A.
Intensive setting
You can use the Intensive setting for particularly strong odour
and fume generation.
Keep pressing button @ until ˜ / › is indicated on the display.
Run time is limited. Then the appliance sets automatically a
lower fan setting. You can always switch back manually.
Fan run-on
Keep pressing button A until – is indicated on the display. The
run time is limited. The appliance runs for 10 minutes at fan
setting 1 and then switches off by itself.
Switching on fan: variant 2
Increase or reduce the fan settings by pressing
buttons 1, 2 and 3.
Light
The light can be switched on and off independently of the fan.
With edge extraction
Pull metal-mesh grease filter downwards.
1.
In doing so, place other hand under the metal-mesh grease
filter.
Take metal-mesh grease filter out of the holder.
2.
Notes
Grease can accumulate in the bottom of the metal-mesh
■
grease filter.
– Do not hold metal-mesh grease filter at an angle, otherwise
grease will drip out.
Installing metal-mesh grease filter
Insert metal-mesh grease filter.
1.
In doing so, place other hand under the metal-mesh grease
filter.
Fold up metal-mesh grease filter and lock.
2.