Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Getting started - initial set up
1
2
3
4
7
38
1.
Using the RF cable supplied, connect the TV to the TV Aerial wall socket (Fig A).
Connect the power cable to the Electrical outlet (Fig B).
2.
Turn on the device with marked ON/OFF switch
3.
Insert the batteries supplied into the Remote control and press the Standby
button to power on the TV.
4.
You will now be welcomed with the initial set-up screen. If it does not appear, on
the remote control, please press [MENU] then 8-8-8-8 and the menu will appear.
As part of our continuing eff orts to reduce energy consumption, we added a
new Ecohome feature (appears on the screen fi rst installation). This function
helps reduce energy consumption up 15% compared to other modes. The
image brightness is reduced using Ecohome mode. If this setting does not suit
your environment, you can choose from other modes
Note: the professional mode is the optimal default mode, but consumes
15% more than the Ecohome)
Select your language, country, environment and Tune Type.
Press OK on the remote control and tuning will start.
5.
In the next step select your digital boradcasting type. The analog section will be
searched automatically, since most cable networks includes analog channels.*
6.
STANDB Y
7.
After completion of the following channel search screen is displayed:
Sollten einzelne Sender nicht gefunden werden, kann die Ursache an einer zu
TV/RADIO TV GUID
geringen Signalstärke oder Qualität liegen. In diesem Falle könnte der Einsatz
ATV
eines Antennenverstärkers oder einer aktiven Antenne von Nutzen sein. Nach einer
entsprechenden Aufrüstung führen Sie bitte eine erneute Kanalsuche durch. Hierzu
siehe >>Menü Programmkanäle.
Tip:
nels/ programmes) you will need to increase the signal reception in order to
receive all of the channels available. The most economical way to do this is by
purchasing and connecting a 'signal booster' in between the TV and the TV
aerial socket. If this does not solve the problem, you will need to upgrade the TV
aerial to a digital hi-gain compatible aerial
If the TV fi nds some, but not all, of the Digital channels, the TV is
functioning correctly but the signal being received is not strong
enough. (The signal strength needs to be above 85% - you can see
the signal strength the TV is receiving when you change chan-
Werbung
Inhaltsverzeichnis
