Firmware Remote Upgrade; Time Synchronization - urmet domus 1093 Schnellstartanleitung

6.1.5

FIRMWARE REMOTE UPGRADE

Select "Update Remotely" then select "Browse" the path for upgrade file. It is reccomended to move the upgrade digicap
file into PC Desktop. Click on "Upgrade" button and wait for the upgrade process is completed. After upgrading
Firmware, the NVR reboot is notified with a message. Confirm and reboot the NVR.
Note: For other Remote Configurations details please refer to Urmet NVM PLUS User Manual.
6.2

TIME SYNCHRONIZATION

Click
Descriptions on Software Configuration:
Software
Configuration
Synchronization Function
DS1093-072
to enter the following interface:
Descriptions
Auto Synchronize
25
Descriptions
means enable it, and user can set the time for
synchronization with time PC