General Settings; Warnings; Power; Safety Precautions - urmet domus 1093 Schnellstartanleitung

1

GENERAL SETTINGS

Dear Customer,
Thank you for having purchased this Urmet product.
This document is a simple, quick reference guide to help you start up the NVR URMET S.p.A. Ref.1093/111-112.
NOTE
For more detailed information about the devices, refer to the full instruction manual inside the CD provided with the product.
1.1

WARNINGS

1.1.1

POWER

Check mains rating before plugging the power unit in.
Do not pull the cable to unplug the device.
Switch the device off before unplugging power unit. This operation must not be performed when the NVR is recording,
playing or from the configuration menu. Stop recordings and playback in progress before disconnecting power from
the device to prevent damaging the hard disk beyond repair.
1.1.2

SAFETY PRECAUTIONS

Keep the device away from rain and humidity to prevent risk of fire and electrocution. Do not introduce material (solid
or liquid) inside. If this should accidentally occur, disconnect the device from the mains and have it inspected by
qualified personnel.
Never open the device. In all cases, contact a qualified personnel or authorised service centre for repairs.
Keep the device away from children, to prevent accidental damage.
Do not touch the device with wet hands to prevent electrical shock or mechanical damage.
Do not use the device if it should fall or the external casing is damaged. Risk of electrocution if the device is used in
such conditions. Contact the retailer or authorised installer.
1.1.3

INSTALLATION PRECAUTIONS

To prevent overheating the device, arrange it in a position allowing the flow of air through the slots in the casing.
Ensure at least 5 cm of free space when installing inside a rack. For the same reason, do not install sources of heat,
such as radiators or hot air ducts. Keep away from direct sunlight. Do not install in areas subject to excessive dust,
mechanical vibrations or shocks.
Do not arrange this device on an unstable surface, such as a tottering or slanted table. The device could fall causing
injury or mechanical failures.
Do not install the device in a place where it could be exposed to humidity or water. Do not direct a jet of water onto the
device: risk of fire, electrocution or mechanical failure.
Stop using the device if water or other material should penetrate inside: risk of fire and electrocution. Contact the
retailer or authorised installer.
Do not place heavy or heat generating objects on top of the device: this could damage the casing and/or increase
internal temperature causing faults.
Do not cover the device with a cloth while it is running to prevent deforming the external casing and overheating the
internal parts: risk of fire, electrocution and mechanical failure.
Keep magnets and magnetised objects away from the device to prevent faults.
Do not use the device in presence of smoke, vapour, humidity, dust or intense vibrations.
Wait for a while before operating a device immediately after transporting it from a cold place to a warm place and vice
versa. Wait on average for three hours: this will allow the device to adapt to the new ambient (temperature, humidity,
etc.).
1.1.4

IMAGE RECORDING

This device was designed to record images, not as a burglar alarm. URMET Domus S.p.A. cannot be held liable for
loss or damage following theft sustained by the user.
Make a test recording before using the device to make sure that is working correctly. Please note that URMET Domus
S.p.A. is not liable for loss of stored data consequent to loss or damage caused by incorrect observation installation,
use, improper use or malfunctioning of the device.
This device contains precision electronic components. Protect the device from shocks to ensure correct recording of
images.
1.1.5

PRIVACY AND COPYRIGHT

The DVR DVS digital video recorder is a device for CCTV systems. Recording of imagines is subject to the laws in
force in your country. Recording of images protected by copyright is forbidden.
Product users shall be responsible for checking and respecting all local rules and regulations concerning monitoring
and recording video signals. The manufacturing SHALL NOT BE LIABLE for use of this product not in compliance with
the laws in force.
DS1093-072 15