Care And Attendance - Kaiser EG Serie Gebrauchsanweisung

40
Downloaded from www.Manualslib.com manuals search engine

CARE AND ATTENDANCE

REPLACING THE OVEN LIGHT
The oven light 1 must have these precise features:
a) it must be able to resist high temperatures (up
to 300°C)
1
b) power supply: see V/Hz indicated on data plate.
c) power 25W.
d) E 14 connection.
Attention! First of all disconnect the
apparat from the power supply
x
to prevent damage, place a tea cloth in the
oven
x
unscrew the glass cover of the light
x
unscrew the old light bulb and replace it
with the new one
x
put back the glass cover and remove the
tea cloth
x
connect the
electricity supply
Oven
The inner walls of the oven are covered with easy
to be cleaned high quality enamel. The very
smooth surface
appearance of the remaining soiling on the walls of
the oven very fast and can be also simply cleaned.
The anti-acid-containing quality of this enamel
permits a long-term qualitatively high exploitation
of Your oven
The oven is to be cleaned after every use.
Attention! As a safety precaution, before
cleaning the oven, always disconnect the
plug from the power socket or the power
cable from the oven.
Clean the oven room only with tepid water and a
little bit of washing-up liquid. After washing the
oven is to be dryed with a dry rag or to be dryed
with an open door.
Do not use acid or alkaline substances to clean the
oven (lemon juice, vinegar, salt, tomatoes etc.). Do
not use chlorine based products, acids or abrasive
products to clean the painted surfaces of the oven.
EN
appliance to the main
counteracts against the