Carson Reflex Wheel Ultimate Touch Betriebsanleitung Seite 70

Most of functions are set using a dialog bog.
D
A dialog box contains a set of different objects.
Touching a button will execute or select the
function associated to it.
Reverse
The reverse function individually reverses the
direction of operation of the servos on Ihe 4 channels.
This dialog box contains 4 big check boxes, one for
each channel. To toggle Ihe reverse state of a channel,
just touch It.
In this example, only the third channel is reversed,
the other channels operate normally.
70 CARSON Reflex Wheel Ultimate Touch 500500516
Downloaded from www.Manualslib.com manuals search engine
This example contains the following objects:
• The value of the selected parameter is displayed
in the value box on the top of the dialog box.
• The 3 buttons "Forward", "Dead zone" and "Back-
ward" select the parameter to modify. To activate
a button, simply touch it. The selected option is
highlighted in yellow.
• The wheel at the bottom allows to modify the
value of the selected parameter. To decrease the
parameter value, touch the wheel anywhere on
the right and slide it to the left. To increase the
parameter value, touch the wheel anywhere on
the left and slide it to the right.