Installation; Unpacking And Positioning; General Information - Pkm 8060G Bedienungsanleitung

1. Unpack the appliance carefully. Dispose of the packaging as described in the chapter
2. Completely remove the transport-protection. Be very careful and do not use any
3. Check before installation if the power cord or the appliance itself are not damaged.
4. The appliance must be connected to the mains with a properly grounded socket only.
5. Do not install the appliance in an area where it may come in contact with water or rain
6. The appliance is designed for indoor use only.
7. The appliance must be correctly connected to the mains.
Minimum distance hood to
Glass-ceramic and cooking ring
Gas jet
Coal / oil / stove wood firing
Downloaded from www.Manualslib.com

Unpacking and positioning

While unpacking, the packaging materials (polythene bags, polystyrene
pieces, etc.) should be kept away from children.
waste management.
aggressive or abrasive detergents to remove residuals of the transport-protection.
in order that the insulation of the electrical components would not be damaged.
Strictly observe the minimum distance between hood and hob.
1. Strictly observe the consecutive numbering of the installation steps and the
additional instructions.
2. Models which lead the exhaust outwards: the exhaust is conducted by an exhaust
hose which is connected with a connecting ring.
3. The diameter of the exhaust hose has to meet the diameter of the connecting
ring.
4. When a one-way valve is used, check after installation of the hose if the valve
works properly.
5. Depending on the model the hood is equipped with one ( top ) or two ( top, back
) outlets.
6. The extractor hood is normally preset for the use of the top outlet as well as for
extraction mode.
manuals search engine

5. INSTALLATION

WARNING!

General information

62
65 cm
70 cm
85 cm