Cleaning And Maintenance; Disposal / Recycling; Scope Of Delivery - HSM shredstar S10 Betriebsanleitung

7 Cleaning and maintenance

WARNING
Dangerous mains voltage!
Improper handling of the machine can lead
to an electric shock.
Switch the shredder off before
relocating or cleaning it and
disconnect the mains plug.
Service work which requires the
housing covers to be removed
may only be carried out by HSM
Customer Service and service
technicians of our contractual
partners. See page 154 for our customer
service addresses.
Clean the document shredder only with
a soft cloth and a mild soap-water solu-
tion. However, no water must enter the
equipment.
X5, X8 only:
Oil the cutting unit when
cutting performance
decreases or the device
becomes noisy, or every
time you empty the waste container. Only
use HSM special lubricating oil for the cutting
unit to do this:
• Spray the special cutting unit oil through
the paper feed along the entire width of
the cutting shafts.
• Run the cutting unit backward without
adding paper. To do so, press the R key.
 Paper dust and particles are shaken off.
07/2016

8 Disposal / Recycling

Electrical and electronic old
devices contain a variety of valu-
able materials, but also hazardous
substances which were required
for function and safety. Incorrect
disposal or handling can be dan-
gerous to your health and the environment.
Never dispose of old devices in the house-
hold waste. Observe the current applicable
regulations and use the collection points for
returning and recycling electric and elec-
tronic devices. Dispose of all the packaging
materials also in an environmentally-respon-
sible way.

9 Scope of delivery

• Paper shredder in carton packing
• Operating instructions
Acces so ries
• Special cutting block oil 250 ml
order No.: 1.235.997.403
See page 154 for our customer service
addresses.
HSM shredstar
english
13