Attachment Of The Drive And Rail - RADEMACHER RolloPort SX5 DuoFern Originalbetriebsanleitung

9.8 Attachment of the drive and rail

(A)
A / B / C / D refers to the following pages
Installation on the lintel
The installation should preferably be on the lintel, as
this means that the forces encountered can best be
absorbed.
Installation on the ceiling
For installation on the ceiling, you should rotate the
header bracket by 90 degrees and fix it to the ceiling
further inward. The full rail length can then be used
as a result.
NOTE!
◆ When fitted to the ceiling, the distance to the
door leaf must be a maximum of 25 cm.
◆ In the case of garage walls or garage ceilings
made of stone (concrete), use the enclosed hexa-
gon screws (8 x 60) and wall plugs Ø 10 mm.
58
(C)
(D)
(B)
Installation on
the lintel
Installation on
the ceiling
EN
min. 1.5 cm
max 25 cm