Introduction; About This User Guide; About The Professional 3400 And 5400N - Rimage Professional 3400 Bedienungsanleitung

Introduction

This manual provides the information needed to configure, operate, and maintain the Rimage Professional™ 3400 and
5400N systems. The terms 'system' and 'autoloader' may be used throughout this manual to refer to both the 3400 and the
5400N; any differences between the 3400 and 5400N are noted. The term 'printer' is use to refer to the integrated Everest
400 printer.
For technical information, refer to the
Rimage Professional 3400 and 5400N Specification document found at www.rimage.com/support. From the Support menu
select: Professional Series > Product Name > User Manuals tab.
 Note: Your Professional 3400 or 5400N system may not look exactly like the model featured in this user guide.

About this User Guide

• While we try to maintain all versions of our manuals and documentations, please note that the English version found on
our web site always contains the most up-to-date information.
• Unless otherwise indicated, all Windows navigation statements are Windows XP paths. Other Windows operating
system navigation may differ slightly.
• These symbols are used throughout the manual to help clarify information:
 Note: A Note provides supplemental information or information that may apply only in special cases. For example,
memory limitations, equipment configurations, or details that apply to specific versions of a program would be
included in a Note.
Tip: A Tip provides techniques and procedures to help with your specific needs. A Tip suggests alternative methods
that may not be obvious and helps you understand the benefits and capabilities of the product.
-
Important! An Important note provides information essential to the completion of a task. You can disregard
information in a Note or Tip and still complete a task, but do not disregard an Important note.
n
Caution: A Caution indicates that failure to observe this guideline could result in loss or damage to the equipment,
product, software, or data.
, ,
Warning! A Warning indicates that failure to follow this guideline could result in bodily injury to personnel
operating or maintaining the equipment.

About the Professional 3400 and 5400N

The 3400 and 5400N are part of the Rimage Professional series of products. The 3400 system consists of the 3400
autoloader and an integrated Everest 400 printer. The 5400N systems consists of the 5400N autoloader, an integrated
Everest 400 printer, and an embedded control center (PC). Information about the integrated Everest 400 printer is included
in this user guide.
An external PC must be used with the non-embedded 3400 system. The external PC does not ship with a non-embedded
system; you must provide a PC to be used as the external control center. Refer the
Specifications section on page 10 for the minimum PC requirements for the 3400.
The embedded PC in the 5400N is a network-ready device that receives orders from other networked computers. You can
also operate the autoloader remotely by using Microsoft Remote Desktop Connection or Rimage WebRSM or locally by
attaching a monitor, keyboard, and mouse.
For information about setting up and submitting orders from a networked PC, refer to the Rimage Advanced Setup
(Networking) Guide available at www.rimage.com/support.
2001431_B
Downloaded from www.Manualslib.com
Professional 3400 and 5400N Specifications
manuals search engine
section on page 10 of this manual or the
Professional 3400 and 5400N
5