Special Safety Instructions For The Operation The Machine; Safety Instrcution For Battery And Charger - Zipper Maschinen ZI-RTR40V-AKKU Betriebsanleitung

 Keep your hands and feet away from moving machine parts and always ensure a secure
stand when working.
 Remove the setting tool from the machine before switching on.
 Never leave the running machine unattended (always switch the machine off before
leaving).
 Ensure that unauthorised persons maintain an appropriate safety distance from the
machine, and in particular keep children away from the machine.
 The machine may only be operated, maintained or repaired by persons who are familiar
with it and who have been informed of the risks involved in this work.
 Always wear suitable personal protective equipment (hearing protection, safety shoes
etc.)!
 Do not work on the machine if you are tired, unconcentrated or under the influence of
medicines, alcohol or drugs!
 Do not use the machine in areas where vapours from paints, solvents or flammable liquids
represent a potential danger (danger of fire or explosion!).
 Do not use a machine with a defective switch. A machine that can no longer be switched
on or off is dangerous and must be repaired
 Only use spare parts and accessories recommended by Zipper machines.

11.4 Special safety instructions for the operation the machine

 Wear solid and non-slip footwear when working. Slips/stumps/falls are a major cause of
serious or fatal injuries.
 Caution on uneven work surfaces and on work surfaces with slopes - never mow on
slopes that are too steep
 Never cut: above waist height, standing on a ladder, on trees
 Regular breaks reduce the safety risk of losing control due to fatigue. Always change
working position. Avoid abnormal posture
 No other person may stay within a radius of 15m!
 Keep this distance even to things! Risk of damage to property!
 When working with the machine use suitable protective equipment (safety goggles or
face protection, safety helmet, hearing protection, sturdy shoes, long trousers)
 Wear sturdy gloves when operating the trimmer or when installing or removing the
cutting tool
 To avoid damage, never slide the machine, always lift it completely
11.5

Safety instrcution for battery and charger

CHARGER:
 The charger is only suitable for charging the batteries that match the charger. Charging
other batteries is not permitted (suitable batteries are described in the operating manual).
 Never use the charger in a damp or wet environment.
 Only disconnect cable connections by pulling the plug. Pulling on the cable could damage
the cable and plug and electrical safety would no longer be guaranteed.
 Never use the charger if the cable, plug or the device itself is damaged by external
influences. Then take the charger to the next authorised workshop.
 Prevent the cooling function of the unit from being impeded by covering the cooling slots.
 Do not operate the unit near heat sources.
 Do not use an extension cable to connect the charger to the power supply unit of the
charging station.
 Do not place any metal objects in the area of the charging contacts of the charging
station.
 Never open the charger. In the event of a fault, contact a qualified workshop.
 Only use the original charger to charge the battery. Using other chargers may cause
defects or cause a fire
 Always check that the mains voltage and frequency match the voltage / frequency
indicated on the charger's type-plate
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RTR40V-AKKU
SAFETY
18