Gima 28220 Anleitung Seite 2

INSTRUCTION FOR USE
Connect the short silicon tube, with antibacterial filter, to the suction connector. The other tube, with one end
connected to the filter must be connected with the other end to the jar's lid connector where has been fixed
the red float. When the 90% of the volume of the jar is reached there is the activation of the security float (the
float close the aspiration connector on the jar) to avoid liquid penetration inside the device.
The device must be used on a plan of horizontal operation.
Filter assembling
Make sure the filter is assembled with the arrows on the side of the patient.
WARNING: The inside of the medical device must be regularly checked for the presence of liquids
or other visible contamination (secretions). In the presence of liquids or other visible contamination,
immediately replace the medical device due to the risk of an insufficient vacuum flow rate.
These products have been designed, tested and manufactured exclusively for single patient use and
for a period no longer than 24 hours.
• Connect the long silicon tube to the other jar's lid connector
• Connect the other end of the long silicon tube to the probe plastic connector then connect the suction probe to it.
• Unscrew the jar's lid and fill the jar 1/3 full or ordinary water (this for an easy cleaning operations and an
rapid reaching of the functionality vacuum) the rescrew the lid on the jar correctly.
• Push foot to start suction.
• To extract the accessories and start with cleaning as write in the clean chapter
NEVER USE THE DEVICE WITHOUT JAR AND / OR PROTECTION FILTER
MAKE SURE THAT CHILDREN AND/OR MENTALLY ILL PEOPLE DO NOT USE THE DEVICE WITHOUT
ADULT SURVEILLANCE
SYMBOLS
Caution: read instructions (warnings) carefully
Keep in a cool, dry place
Manufacturer
Product code
Medical Device complies
with Directive 93/42/EEC
Temperature limit
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
ENGLISH
Consult instructions for use
Keep away from sunlight
Date of manufacture
Lot number
Serial number
Humidity limit
10