Audio Mode - Philips AVENT SCD841 Bedienungsanleitung

14
English
1
VIDEO 20°C
1
VOX 20°C
AUDIO
AUDIO VOX
1
AUDIO 20°C
When the VIDEO mode is activated, the screen is always on, so you can see
your baby. All sounds are directly transmitted to the parent unit.
Note: Set the sensitivity level to 'very high' to have continuous sound
on the parent unit. Please see the Sensitivity level chapter for more
information.
If your baby cries, the sound level lights light up green. As long as no sound
is detected, the sound level lights are off.

AUDIO mode

1 Press the mode button on the side of the parent unit to switch to AUDIO
mode.
When the AUDIO mode is activated, the display of the parent unit
switches off. After 3 seconds the display will completely turn off and the
status bar will disappear.
Note: The status bar is not visible when the display is off.
Note: The link light shows that the parent unit is still on and connected to
the baby unit.
Note: When sensitivity level is not set to 'very high', low sounds will be
muted.
Note: Set the sensitivity level to 'very high' to have continuous sound
on the parent unit. Please see the Sensitivity level chapter for more
information.
All sounds are constantly transmitted to the parent unit. If your baby
cries, the display of the parent unit is still off, but the sound level lights
light up green and the sounds detected by the baby unit are transmitted
to the parent unit. As long as no sound is dete cted, the sound level lights
are off.