3-Initial Operations And Settings; 3-1.Power On And Off; Setting The Reference Level; 3-3.Control Unit For Instrument - Beta 1693 Benutzerhandbuch

3-Initial operations and settings

3-1.Power On and Off

Switches on the instrument and the laser.
Press and hold this button for 3 seconds to turn off the
instrument. The meter automatically turns off after three
minutes of inactivity.
3-2.Setting the reference level (See "Figure D")
The default reference setting is from the back of the
instrument.
Figure D
3-3.Control unit setup for instrument
On power up, hold this key longer until m or ft-in unit icon
appears on the screen.
The following unit can be set:
1
2
Laser Distance Meter
Distance
0.000m
0'00"1/16
14