User Safety; Product Overview - Stanley RL HW Bedienungsanleitung

Contents
• Safety

• Product Overview

• Feature Set
• Keypad, LED, and LCD
• Batteries and Power
• Set Up
• Operation
• Accuracy Check and Calibration
• Specifi cations

User Safety

WARNING:
• Carefully read the Safety Instructions and
Product Manual before using this product.
The person responsible for the instrument must
ensure that all users understand and adhere to
these instructions.
CAUTION:
• While the laser tool is in operation, be careful
not to expose your eyes to the emitting laser
beam (red light source). Exposure to a laser
beam for an extended time may be hazardous
to your eyes.
CAUTION:
• Glasses may be supplied in some of the laser
tool kits. These are NOT certifi ed safety glasses.
These glasses are ONLY used to enhance the
visibilty of the beam in brighter environments or
at greater distances from laser source.
Retain all sections of the manual for future reference.
8
WARNING:
• The following label samples are placed on
your laser tool to inform of the laser class for
your convenience and safety. Please reference
the Product Manual for the specifi cs on a
particular product model.
EN 60825-1
Product Overview
Figure A -
Laser Tool in Horizontal Position
1. Alignment Sight
2. Vertical Up Beam Window (RL HV / RL HVPW)
3. Rotary Laser / Glass Enclosed
4. Charging / Power Adapter Plug Jack
5. Keypad (See Figure
6. Vertical Down Beam (RL HVPW)
7. Infrared Sensor for Remote
(RL HW+ / RL HGW / RL HV / RL HVPW)
Figure B -
Laser Tool in Vertical Position
Figure C -
Laser Tool with Sighting Telescope Accessory
(RL HGW)
8. Sighting Telescope
9. Sighting Telescope Mount Base
Figure D -
Sighting Telescope
10. Eyepiece (Shown with Cover ON)
11. Reticle Focus
12. Windage / Elevation Adjustment Covers
(DO NOT OPEN / ADJUST)
13. Locking Screws
14. Objective (Shown with Cover ON)
Figure E -
Keypad Confi gurations
77-496 / 77-429 / 77-439 / 77-497 / 77-427
L A S E R R A D I AT I O N - D O N O T
S TA R E I N T O T H E B E A M O R V I E W
D I R E C T LY W I T H
O P T I C A L I N S T R U M E N T S
C L A S S 2 L A S E R P R O D U C T
Max Output ≤ 1 mW @ 630 - 670 nm
)
E