Care And Cleaning; Technical Data - BASETech BT-2268546 Bedienungsanleitung

Care and cleaning

• Before cleaning the heater, check that it is disconnected from the mains and ensure that it
has cooled down to room temperature.
• Do not clean the heater with water, as this may cause an electric shock. Do not immerse
the heater in water!
• Use a damp, lint-free cloth to clean the exterior casing. If the heater gets wet, leave it to dry
out completely before using it again.
• Use a vacuum cleaner to remove dust that accumulates on the air outlet.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
could damage the casing or cause the product to malfunction.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines. You thus fulfill your statutory obligations and con-
tribute to the protection of the environment.
Model identifier(s): Item No. 2268546 (AF501), Item No.: 2268547 (AFB801), Item No.: 2268548 (AF901)
Item
cfvvv
Heat output
Nominal heat output
Minimum heat output (indicative)
Maximum continuous heat output
Auxiliary electricity consumption
At nominal heat output
At minimum heat output
In standby mode
Contact
Symbol Value Unit Item
Type of heat input, for electrical storage local space heaters only (select one)
P 1.962 kW Manual heat charge control, with integrated thermostat
nom
P 1.0 kW Manual heat charge control with room and/or outdoor temperature feedback
min
P 1.962 kW electronic heat charge control with room and/or outdoor temperature feedback
max,c
Fan assisted heat output
el N/A kW Type of heat output/room temperature control (select one)
max
el N/A kW Single stage heat output and no room temperature control
min
el N/A kW Two or more manual stages, no room temperature control
sb
With mechanic thermostat room temperature control
With electronic room temperature control
With electronic room temperature control plus day timer
With electronic room temperature control plus week timer
Other control options (multiple selections possible)
Room temperature control, with presence detection
Room temperature control with open window detection
With distance control option
With adaptive start control
With working time limitation
With black bulb sensor
Conrad Electronic SE (Klaus-Conrad-Str. 1, D-92240 Hirschau)

Technical data

Input voltage ................................. 230 V/AC, 50 Hz
Rated power ................................. max. 2000 W
Switch position I: 1000 W
Switch position II : 2000 W
Recommended room size ............. 16 m
Protection class ............................ II
Adjustable thermostat ................... yes
Protection ..................................... Overheat, tip-over
Important: Item no. 2268548 does not have tip over protection.
Cable length ................................. 1.5 m
Operating conditions ..................... -4 to +30 ºC, 10 – 90 % RH (non-condensing)
Storage conditions ........................ -10 to +35 ºC, 10 – 90 % RH (non-condensing)
Dimensions (W x H x D) ............... Item no. 2268546: 20.5 x 12 x 25 cm
Item no. 2268547: 20.5 x 29 x 16 cm
Item no. 2268548: 23.5 x 23.5 x 11 cm
Weight .......................................... Item no. 2268546: 795 g
Item no. 2268547: 1170 g
Item no. 2268548: 1065 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
2
*2268546-8_v2_1120_02_dh_m_en
Yes / No
N/A
N/A
N/A
N/A
No
No
Yes
No
No
No
No
No
No
No
No
No