Using The Radio For The First Time; Setting The Clock Time - PERFECTPRO ROCKMATE Bedienungsanleitung

Using the radio for the first time

1. Place your radio on a flat surface.
2. Please press the Standby button to switch on your radio. It may be

Setting the clock time

1. Press and hold the Tuning knob until the hour digits of the clock
2. Press and release the Tuning knob to save the hour setting, and the
3. Press and release the Tuning knob to save the minute setting and
Note: The clock time setting can be done at power Off or On status.
You can also set the clock time with the FM RDS. This can
automatically set the time (CT)
Press the source to FM radio, select a FM radio station which provides
RDS CT service, the clock will be aligned in 2 minutes once the CT
service is available.
Once the FM radio station has been changed to one with RDS
CT service, the clock time will be aligned again.
9
Downloaded from www.Manualslib.com
necessary to relocate your radio to a position giving better reception.
You should then carry out a scan to find stations in FM.
time begins flashing. Rotate the Tuning knob to choose the hour
digit as needed.
minute digits on the display will flash. Rotate the Tuning knob to
choose the minute digits as needed.
complete the clock setting. The radio will save your setting.
The radio will display saved time after clock time setting
is completed.
manuals search engine
1-3