Daily Use; Setting And Starting A Programme - Electrolux GA60GLISWE Benutzerinformation

12 www.electrolux.com

9. DAILY USE

Downloaded from www.Manualslib.com
8.2 How to fill the rinse aid
dispenser
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in user
mode.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent. If you use multi-
tablets, activate the option Multitab.
5. Set and start the correct programme
for the type of load and the degree of
soil.
9.1 Using the detergent
A B
C
manuals search engine
A B
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse aid
3. Remove the spilled rinse aid with an
4. Close the lid. Make sure that the lid
C
1. Press the release button (A) to open
2. Put the detergent, in powder or
3. If the programme has a prewash
4. Close the lid. Make sure that the lid
9.2 Setting and starting a
programme
The AUTO OFF function
This function decreases energy
consumption by deactivating automatically
the appliance when it is not operating.
The function comes into operation:
• 5 minutes after the completion of the
• After 5 minutes if the programme has
CAUTION!
Only use rinse aid specifically
designed for dishwashers.
reaches the marking ''MAX''.
absorbent cloth to prevent too much
foam.
locks into position.
Fill the rinse aid dispenser
when the indicator (A)
becomes clear.
CAUTION!
Only use detergent
specifically designed for
dishwashers.
the lid (C).
tablets, in the compartment (B).
phase, put a small quantity of
detergent on the inner part of the
appliance door.
locks into position.
programme.
not started.