Inhaltsverzeichnis
Werbung
GB-FR-NL-30
Downloaded from
www.Manualslib.com
manuals search engine
GB
(b)
P.T.O.
Ford tractors:
To engage the P.T.O. the selector knob should
be pulled fully out. To disengage the P.T.O.
drive the selector knob should be pushed in.
Massey Ferguson:
To engage live P.T.O. depress clutch pedal
fully, lift handle and pull lever back (engine
speed P.T.O.). To disengage the P.T.O. drive,
depress clutch pedal fully, move the lever to
the central (neutral) position and release the
handle.
Tractors with Duel Range P.T.O
The "low" range must be used, i.e.. 540 P.T.O.
rpm at approximately 1800 engine rpm.
IMPORTANT: Do not use "Ground Speed P.T.O."
2.
Start the tractor, and lower the lift arms by
means of the quadrant lever to the fully lowered
position.
3.
Engage the tractor P.T.O.
4.
Engage the selected tractor gear in readiness
for moving off. Massey Furguson Tractors with
"Multi-power" options can be operated with
MULTI-POWER either IN or OUT on level
ground. Where long banks or slopes are to be
cut, and it is necessary to cut downhill,
MULTIPOWER "IN" should be used to maintain
the selected ground speed.
5.
Move the mower control valve lever forward to
engage the forward drive to the cutting
cylinders.
CAUTION: Always put the drive controls in the neutral
position and switch off the engine before dismounting
from the tractor.
IMPORTANT: Do not reverse the tractor with the
machine lowered. Always lift the machine on the
tractor 3 - point linkage before moving in reverse, and
when obstructions are met during cutting.
Werbung
Inhaltsverzeichnis
