Low Battery Indication - Bresser 70-20400 Bedienungsanleitung

Please note: The soil moisture indicator refers to the soil moisture content. The necessity of watering a
plant predominantly is depending on the type of plant monitored.
Soil moisture for all channels
Next to the sensor channel (different sensors) the main unit permanently displays the soil moisture for all
sensors connected to the main unit in form of a bar chart. This display ranges from one bar (DRY) to four
bars (WET) for every channel. The channel number is displayed underneath the bars.
Temperature indicator
The main unit can display the air temperature as well as the soil (SOIL) temperature for every individual
sensor (up to 5 sensors = channels).
By pressing the [CH]-button the channel for one of the sensors can individually be chosen. The display will
then show the following information for this channel:
Air temperature
In addition, the inside temperature permanently is displayed.
Inside temperature

Low battery indication

Low battery indication is available for the home unit itself, as well as all for 5 connectable remote sensors.
Replace the batteries and follow the setup procedure as mentioned in this instruction manual when batteries
become flat.
Cleaning and Care
Before cleaning the device, disconnect it from the power supply (Remove batteries)!
Only use a dry cloth to clean the exterior of the device. Do not use any cleaning fluid to avoid damaging
the electronics.
Protect the device from dust and moisture! The batteries should be removed from the unit if it has not been
used for a long time.
26
Downloaded from www.Manualslib.com
Soil temperature
manuals search engine