Reset (Manual Reset) - Konig + Neurath LIFE.S Bedienungsanleitung

RESET (MANUAL RESET)

When getting started or in the case of malfunction
(e.g. power cut).
To perform a reset, proceed as follows:
Exit the energy-saving mode of the control
system by briefly pressing the UP or DOWN
button.
Hold down the UP and DOWN buttons at the same
time. After approx. 3 seconds, the reset starts.
Keep the buttons pressed until the reaching of
the reset position is confirmed by a double
clicking sound from the control system.
Now release the buttons.
During the reset process, the collision cut-out is
inactive! Beware of the risk of crushing. Please
ensure that there are no objects or persons in the
hazard area (the total potential lift and movement
area for all components) and that they cannot be
pulled into the hazard area.
Further information on motorized or manual controls
can be found at www.kesseböhmer.com
42

+
